User Password Setting Operating Controls 2-63 DX225LC-3 PM On the password setting screen, when cursor is Password Setting placed on the user password setting, click on the jog switch to display the password input screen that was User Password Setting set up at the initial release time. The initial password Owner Password Setting is set as "1111". The password input is possible within 10 minutes of turning "ON" the starter switch. s ISO If you have changed the password, you should input DIG USB it. FG0185 Figure 163 Enter Password IMPORTANT User Password If password input errors have been made three times in a row, the screen will move to the default screen.
After that, starting will be locked for 10 minutes. Enter User Password FG0184 Figure 164 How to Input Password Password Setting Turn the jog switch and select numbers of 0 - 9 at the bottom. Then, click on the jog switch and input a password. User Password Setting Lock Unlock If you erroneously input a password, select key at the right bottom and click on the jog switch to delete User Password Change the input password. On the password setting screen, input a password to display a screen to select the application of function (lock), non-application (unlock) and password FG0185 Figure 165 change. Turn the jog switch and move the cursor to a target.
Then, click on the jog switch to move to the relevant function or a selected screen. Press the ESC button to return to the previous screen. Select the lock (applied) or unlock (not applied) in the password setting to enable or disable the password setting function accordingly. PM Password Setting User Password Setting Owner Password Setting s ISO DIG USB FG0185 Enter Password User Password Enter User Password