6. Air Inlet Selector Button This button is used to select fresh air from outside the cabin, or recirculate air within the cabin. Pressing this switch enables the choice between fresh air and recirculating air within the operator's cabin. The select mode is displayed on the LCD. FG000101 Figure 213 A. "A" Symbol - Draws fresh air into operator's cabin. Used to exchange air within the operator's cabin with fresh air. Used to remove condensation or ice on window (Winter/Rainy Season). A B B. "B" Symbol - Recirculates air within the operator's cabin. Used to quickly warm or cool the operator's cabin. FG019042 Figure 214 7.
Fan Speed Selector Buttons These buttons are used to control the speed of the blower fan. Momentarily, pressing a button, changes the speed one stage. Continuously pressing and holding a button, repeatedly changes the speed. FG000103 Figure 215 8. Air Conditioner Button This button is used to turn the air conditioner "ON" or "OFF". When this function is activated, an "A/C" is displayed in the upper left corner of the LCD. A/C FG000105 Figure 216 DX225LC-3 Operating Controls 2-78