How to Connect Air Gun Select and use the quick couplers installed in the operator’s cabin and battery box. 1. Push down the release collar (1, Figure 260) of the quick coupler, at the bottom of the air hose behind the left stand in the cabin, and pull the air hose (2) upwards. 2. Open the door of the battery box on the right side of the equipment. 3. Push the bottom of the air hose into the quick coupler (3, Figure 261) until a 'clicking' sound is heard. CAUTION AVOID INJURY 2 Take care not to squeeze your finger in the coupler gap. 1 Figure 260 FG018586 3 Figure 261 FG020061 Operating Controls 2-97 DX225LC-3