Doosan DX225LC-3 — Engine Exhaust Emission Control System

OPERATING INSTRUCTIONS Engine Speed Control Engine speed can be manually adjusted using the engine speed control dial. Increase engine speed by rotating the control knob clockwise. Decrease engine speed by rotating the control knob counterclockwise. IMPORTANT The engine speed control system has been set at the factory and should not require adjustment as part of routine maintenance. Figure 45 FG018094 Engine Exhaust Emission Control System This machine is equipped with an engine exhaust emission control system that meets applicable engine EPA/EU exhaust emission regulations.

The owner/operator is responsible for proper operation and maintenance of the emission controls system as provided in this manual and the emissions-related warranty provisions. The engine exhaust system is equipped with a diesel particulate filter (DPF). The DPF is an emissions reduction device that removes diesel particulate matter or "soot" from the exhaust gases of the diesel engine. The DPF will trap and collect the particulate matter until it is burned off. The process of burning off the collected particulate matter is called "regeneration". After the regeneration process is completed, ash residue will remain and will need to be periodically removed from the DPF.

Ultra Low Sulfur Diesel fuel and API-CJ-4/ACEA-E9 grade engine oil must be used with this engine for the emission control system to function properly. If you have any questions about the operation or maintenance of your emission control system, contact your DOOSAN distributor. WARNING AVOID DEATH OR SERIOUS INJURY Exhaust gas temperature and exhaust system components are very hot during regeneration. This can cause a fire or burn hazard and result in death or serious injury or property damage. Keep flammable material and explosive gases away from exhaust system during regeneration. Operation 3-23 DX225LC-3