1. Regeneration light: light turns "ON" when regeneration is required, or during the regeneration process. When the operator inhibits regeneration, the symbol will be displayed as shown in the right-hand view of Figure 47. FG018399 Figure 47 2. The high temperature warning light turns "ON" as shown in Figure 48 to alert the operator of hot engine exhaust gases. Figure 48 FG018398 3. Manual (forced) regeneration and inhibit switch: the upper symbol in Figure 49 is shown when the operator selects manual (forced) regeneration with the switch. When the operator inhibits regeneration, the lower symbol will be displayed as shown in Figure 49. NOTE:
If manual (forced) regeneration is necessary after the inhibited regeneration switch is turned "ON", press inhibited regeneration switch again to turn "OFF" the inhibit symbol. Press switch to manual (forced) regeneration position to activate system. FG018400 Figure 49 Operation 3-25 DX225LC-3