Removal and Installation of the DPF Assembly The following instructions must be followed when handling the DPF assembly: 1. The weight is approximately 65 kg (143 Ib) and DPF assembly can be easily damaged. Remove and handle assembly carefully. 2. When replacing the differential pressure sensor, check that sensor pipe is free of foreign materials. Foreign materials can trigger a fault signal because of incorrect differential pressure sensing. 3. When removing from the machine, protect the inlet/outlet of the DPF assembly from foreign materials. Foreign materials can damage the DOC/DPF assembly. 4.
Do not to damage the differential pressure sensor and temperature sensor on the outside of the DPF assembly during disassembly/assembly work. 5. Replace the DPF gasket when reassembling the DPF. Otherwise, an exhaust leak can result. 6. Observe specified tightening torque of the exhaust system fasteners. Leakage in the exhaust system can result in failure to meet emission control regulations. Operation 3-31 DX225LC-3