4. When working close to the excavated edge or drop-off, make sure that the machine is sitting on solid ground. Keep the travel motors (1, Figure 83) to the rear. See Figure 83. 1 FG018411 Figure 83 5. Do not allow bottom side of the boom to interfere with or touch the ground or track when digging a deep hole. See Figure 84. FG018412 Figure 84 6. When machine is equipped with a leveling blade, and digging a deep hole, operate the machine keeping the leveling blade to the rear. Do not to allow the boom to interfere with the leveling blade. See Figure 85. 1 Do not allow bottom side of the boom to interfere with or touch the ground or track blade when digging a deep hole. See Figure 86.
WARNING AVOID DEATH OR SERIOUS INJURY FG020097 When leveling blade is positioned to rear, remember that travel motors (1, Figure 85) are facing edge of drop-off. Figure 85 Check the blade location before traveling. When the blade is to the rear, operate the steering levers/foot pedals in the opposite direction to when the blade is in the front. Move the steering levers/foot pedals slowly. Abrupt lever motion will cause the machine to jerk. Operation 3-43 DX225LC-3