Doosan DX225LC-3 — Machine Setup Position for Maintenance

MACHINE SETUP POSITION FOR MAINTENANCE Before beginning any service work, park the machine using the following procedure (except for service work requiring the machine to be positioned differently). 1. Position the machine on even, firm and level ground. 2. Put attachment on ground. FG018379 Figure 1 3. Move safety lever to "LOCK" position. Unlock Lock EX1300566 Figure 2 4. Allow engine to run at "LOW IDLE" for a minimum of five minutes to allow engine to cool, If this is not done, heat surge can occur. FG018148 Figure 3 Inspection, Maintenance and Adjustment 4-5 DX225LC-3