Doosan DX225LC-3 — Lubrication

RECOMMEND FUEL, COOLANT, AND LUBRICANT Lubrication is an important part of preventive maintenance. To keep your machine in the best condition for long periods of time, it is essential to follow the instructions given in this manual. Failure to follow these recommendations can result in shortened life or excess wear of the engine, power train, cooling system, and/or other components. Commercially available lubricant may be good for the machine, but it can also cause harm. DOOSAN does not recommend any commercially available lubricant additive.

When starting the engine in temperatures below 0°C (32°F), be sure to use recommended multigrade oil, even if the ambient temperature may become higher during the course of the day. If the machine is operated at temperatures below -20°C (-4°F), a separate device is needed, so discuss with DOOSAN distributor. Only use Ultra Low Sulfur Diesel (ULSD) fuel and API-CJ- 4/ACEA-E9 grade engine oil. Lubrication Lubrication is an important part of preventive maintenance. If the machine is lubricated in a specified way, the life of equipment and components can be considerably extended.

The “Lubrication and Service Chart” on page 4-16 makes lubrication work much easier and reduces the risk of forgetting lubrication intervals. IMPORTANT Wipe off grease fittings and grease gun before greasing to prevent sand and dirt particles from penetrating into components. DX225LC-3 Inspection, Maintenance and Adjustment 4-14