Doosan DX225LC-3 — Lubrication and Service Chart

Inspection, Maintenance and Adjustment 4-17 DX225LC-3 SERVICE DATA No. Items to Check Service Qty.

Service Interval 10 50 250 500 1000 2000 4500 1 Arm, Bucket Joint Pin Grease 6 F100 W10 2 Boom, Arm Joint Pin Grease 11 F100 W10 3 Swing Bearing Grease 2 W10 4 Pinion Gear (Swing) Grease 1 5 Swing Reduction Gear Grease 1 W10 6 Swing Reduction Gear Gear Oil 5 ℓ V F 7 Track Spring Grease 2 W10 8 Travel Reduction Gear Gear Oil 2 x 4 ℓ F, V 9 Engine Oil Engine Oil 27 ℓ V F 10 Hydraulic Oil Tank (Full) Hydraulic Oil 200 ℓ V 11 Fuel Tank Diesel 400 ℓ V 12 Water Separator & Pre Fuel Filter (Fuel Prefilter) Cartridge 1 D, V 13 Radiator Coolant 30 ℓ V 14 Hydraulic Oil Return Filter Element 1 F 15 Pilot Filter Element 1 F 16 Hydraulic Oil Suction Strainer Strainer 1 C 17 Engine Oil Filter Cartridge 1 F 18 Main Fuel Filter Cartridge 1 19 Air Cleaner (Outer) Element 1 C Air Cleaner (Inner) Element 1 20 Air Conditioner Filter (Outer) Element 1 C Air Conditioner Filter (Inner) Element 1 C 21 Air Breather Filter* Element 1 22 Fuel Cap Filter Element 1 23 DPF Cartridge 1 C 24 Breaker Filter (Opt) Cartridge 1 25 Air Compressor Filter (Opt) Cartridge 1 C V:

Maintenance and Refill. C: Cleaning. D: Drain Water. F: First Time Exchange Only. F100: Every 10 Hours For First 100 Hours. W10: Every 10 Hours If Operating In Water. EG: Ethylene Glycol - DOOSAN Genuine Antifreeze Solution (Drain and replace using this interval.) See “Engine Cooling System” on page 4-92, for further explanation. : Replacement On Every Interval. NOTE: For additional service items see list of “Maintenance Intervals” on page 4-21. *: When the machine is operated under dusty work sites, the air breather filter needs to be cleaned or replaced on a regular basis even before the expected replacement date.