Doosan DX225LC-3 — Table of Recommended Lubricants

DX225LC-3 Inspection, Maintenance and Adjustment 4-20 Grease Fitting Grease 1) Multipurpose Lithium Grease NLGI No. 2 Cooling System Coolant Add Antifreeze 1) (50% antifreeze - 50% distilled water) 1) Installed at factory. 2) (5W40) - Recommended for use at extremely low temperature below -20°C. 3) (10W40) - Filled at factory. Doosan genuine engine oil is recommended for use. 4) (15W40) - Doosan genuine engine oil is recommended for use. 5) (Engine oil) - Engine oil must meet ACEA-E9 or API-CJ-4. 6) Hydraulic oil change interval is 2,000 hours, only when DOOSAN Genuine Oil is used. If other brands of oil is used, guaranteed change interval is 1,000 hours.

Note that mixing ratio is for reference purpose only, and is not an absolute standard. API: American Petroleum Institute. ACEA: Association des Constructeurs Europens d'Automobiles. ASTM: American Society of Testing and Materials. ISO: International Organization for Standardization. NLGI: National Lubricating Grease Institute. SAE: Society of Automotive Engineers. IMPORTANT Do not mix oils from different manufacturers. DOOSAN does not endorse specific brands but recommends that owners select quality oils whose manufacturers provide assurance that required standards will always be met or exceeded.

IMPORTANT Fluctuating daily or weekly extremes of temperature, or operation in subzero freezing temperatures, may make it impractical to use straight weight lubricants. Select lubricants that are appropriate for climate conditions.