Fuses 1. The fuses in the fuse box are used to protect the various electrical circuits and their components from being damaged. See Figure 154. The fuses used are standard automotive type fuses. O X 2. The section on “Fuse Identification” on page 4-91 lists the circuits and the fuse amperage required for each circuit. If a fuse blows, determine the cause and repair any electrical faults or failures. 3. Do not insert a higher amperage fuse into a lower amperage slot. Serious damage to the electrical components or fire can result. Figure 154 HAOC670L IMPORTANT Before replacing a fuse, be sure to turn starter switch to "O" (OFF) position.
Fuse Boxes There are two fuse boxes (Figure 155) on the left side of the heater box. The fuses prevent electrical devices from overloading or shorting. A decal attached inside the fuse box's cover indicates the function and amperage of each fuse. Spare fuses are mounted on the inside of fuse box's cover. (One each of a 10A, 15A, 20A and 30A.) Change a fuse if the element separates. If the element of a new fuse separates, check the circuit and repair the circuit. Figure 155 FG018292 WARNING AVOID DEATH OR SERIOUS INJURY Always replace fuses with the same type and capacity fuse that was removed. Otherwise, electrical damage or fire could result.
DX225LC-3 Inspection, Maintenance and Adjustment 4-90