Doosan DX225LC-3 — Counterweight

10. Move safety lever to "LOCK" position. Unlock Lock EX1300566 Figure 11 11. Stop engine by turning key to "O" (OFF) position (Figure 12). O I 12. Remove key from starter switch. Figure 12 FG018156 13. Turn battery disconnect switch to "OFF" direction (Figure 13). 14. Lock all doors and covers. 15. Adjust direction of rotating beacon and TMS antenna. Figure 13 FG019403 16. Make sure to secure the excavator onto the trailer before transporting. Place blocking (1, Figure 14) in front of and behind each track. Tie front and rear (2, Figure 15) and tie down point (3, Figure 15) on the lower frame with wire cable as required by local transportation regulations. 17.

Refer to "Specification" section of this manual for overall machine height and width dimensions. Make sure to position the excavator as shown. If not transported in this position, the height measurements may be different. FG018620 1 1 2 Figure 14 DX225LC-3 Transportation 5-6