Doosan DX225LC-3 — Engine

DX225LC-3 Troubleshooting 6-4 Problem Cause Correction Continuous output insufficient. Wear, stick, damage of piston ring. Replace piston ring. Injection timing incorrect. Check. Fuel injection amount insufficient. Check. Injector injection pressure improper or stuck. Adjust or replace. Supply pump's function lowered. Repair or replace. Fuel pipe system clogged. Repair. Air suction amount insufficient. Clean or replace air cleaner. Turbo charger poor. Repair or replace. Intercooler pipe air leak. Hose clamp adjust. Output insufficient when in acceleration. Compression pressure insufficient. Disassemble engine. Injection timing incorrect. Check. Fuel injection amount insufficient. Check.

Injector infection pressure, infection angle improper. Repair, replace. Supply pump's function lowered. Repair or replace. Air intake amount insufficient. Clean or replace air cleaner. Overheating. Engine oil insufficient or poor. Replenish or replace. Cooling water insufficient. Replenish or replace. Fan belt loosened, worn, damaged. Adjust or replace. Cooling water pump's function lowered. Repair or replace. Water temperature regulator's operation poor. Replace. Valve clearance incorrect. Adjust. Exhaust system's resistance increased. Clean or replace. Engine noisy.

For noises arise compositely such as rotating parts, lapping parts etc., there is necessity to search the cause of noises accurately. Crankshaft. As the wear of bearing or crankshaft progress, the oil clearances increase. Replace bearing and grind crankshaft. Uneven wear of crankshaft Grind or replace. Oil supply insufficient because of oil passage clogging. Clean oil passage. Stuck bearing. Replace bearing and grind.