Specification 7-1 DX225LC-3 Specification 7 STANDARD SPECIFICATION Component Specification Metric English Bucket Capacity CECE 0.81 m3 1.06 yd3 SAE (PCSA) 0.92 m3 1.20 yd3 Operating Weight 21.9 metric tons 24.1 tons Engine Model DL06K Type 4-cycle Water Cooled, Turbocharge, Direct Injection, Exhaust Gas Recirculation Rated Output 169 ps @1,800 rpm 167 hp @1,800 rpm Maximum Torque 77 kg•m @ 1,400 rpm 557 ft•lb @ 1,400 rpm Fuel Tank Capacity 400 liters 106 U.S. gal. Hydraulic Pump Type Axial piston Discharging Pressure 350 kg/cm2 4,978 psi Maximum Discharge Quantity 2 x 206.5 liters/min 2 x 54.6 U.S. gpm Hydraulic Oil Capacity Tank Level 140 liters 37 U.S. gal. Full 200 liters 53 U.S. gal.
System 240 liters 63.4 U.S. gal. Performance Digging Capability (SAE) Bucket (STD) 12.6/*13.4 metric tons 13.9/*14.8 tons Arm (STD) 9.9/*10.5 metric tons 10.9/*11.6 tons Digging Capability (ISO) Bucket (STD) 14.3/*15.2 metric tons 15.8/*16.8 tons Arm (STD) 10.2/*10.8 metric tons 11.2/*11.9 tons Swing Speed 11.0 rpm Travel Speed High-speed 5.5 km/h 3.32 MPH Low-speed 3.0 km/h 1.86 MPH Traction Force High-speed 12.8 metric tons 14.1 tons Low-speed 22.4 metric tons 24.7 tons Gradeability 35° (70% slope) Ground Pressure 0.46 kg/cm2 6.53 psi Ground Clearance 480 mm 18.9 in Track Shoe Width 600 mm 23.6 in Upper Roller Qty. 2 per side Lower Roller Qty. 8 per side * Power Boost