Doosan DX225LC-3 — Excavator Rated Lift Capacity Tables

Specification 7-15 DX225LC-3 Track Width : 2.99 m (9’ 10") STD Track A Boom : 5.7 m (18’ 8") Arm : 3.5 m (11’ 6") Bucket : Without Bucket Counterweight : 4,300 kg (9,480 Ib) Shoe : 600 mm (24") B Dozer : Without Dozer : Rating Over Front : Rating Over Side or 360 degree Unit : 1,000 kg (1,000 lb) FG019993 Figure 13 METRIC 1,000 kg A (m) B (m) 1.5 3 4.5 6 7.5 MAX.

REACH A (m) 7.5 * 4.91 4.29 6.89 6 * 4.81 3.72 * 4.87 3.38 7.90 4.5 * 5.34 5.23 * 5.00 3.65 4.52 2.92 8.53 3 * 11.80 * 11.80 * 7.78 7.67 * 6.21 4.96 * 5.41 3.52 4.19 2.68 8.86 1.5 * 9.59 7.07 * 7.13 4.67 5.30 3.37 4.07 2.59 8.92 0 * 7.42 * 7.42 * 10.70 6.69 7.22 4.46 5.18 3.26 4.15 2.62 8.73 -1.5 * 6.56 * 6.56 * 10.42 * 10.42 * 10.95 6.54 7.09 4.34 5.11 3.20 4.47 2.81 8.26 -3 * 10.17 * 10.17 * 14.96 12.77 * 10.37 6.56 7.09 4.34 5.18 3.25 7.47 -4.5 * 14.90 * 14.90 * 12.24 * 12.24 * 8.74 6.73 * 6.24 4.48 * 5.85 4.29 6.22 FEET 1,000 Ib A (ft) B (ft) 5 10 15 20 25 MAX.

REACH A (ft) 25 * 10.84 9.71 22.26 20 * 10.63 7.98 * 10.73 7.55 25.74 15 * 11.63 11.28 * 10.94 7.85 10.02 6.48 27.90 10 * 25.17 * 25.17 * 16.79 16.54 * 13.48 10.69 11.76 7.57 9.25 5.92 29.03 5 * 20.73 15.25 * 15.45 10.08 11.42 7.27 8.97 5.70 29.28 0 * 16.89 * 16.89 * 23.18 14.42 15.54 9.61 11.15 7.02 9.15 5.78 28.65 -5 * 14.65 * 14.65 * 23.60 * 23.60 * 23.73 14.09 15.27 9.37 11.02 6.90 9.86 6.20 27.08 -10 * 22.79 * 22.79 * 32.40 27.37 * 22.44 14.13 15.27 9.37 11.49 7.21 24.41 -15 * 33.62 * 33.62 * 26.29 * 26.29 * 18.71 14.52 * 13.10 9.72 * 12.89 9.62 20.16 1. Load point is the end of the arm. 2. Capacities marked with an asterisk (*) are limited by hydraulic capacities. 3.

Lift capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. 4. The least stable position is over the side. 5. The total weight of machine is 21,300 kg (47,000 lb). Included are the; boom 5.7 m (18' 8"), arm 3.5 m (11' 6"), 4,300 kg (9,480 lb) counterweight, without bucket, all operating fluids and a 75 kg (165 lb) operator. 6. Lift capacities are in compliance with ISO 10567.