Specification 7-29 DX225LC-3 FEET 1,000 Ib A (ft) B (ft) 30 35 40 45 MAX.
REACH A (ft) 35 * 5.34 * 5.34 * 4.24 * 4.24 36.24 30 * 5.18 * 5.18 * 4.05 * 4.05 39.72 25 * 5.28 * 5.28 * 5.29 4.28 * 3.95 3.73 42.37 20 * 5.56 5.46 * 5.41 4.20 * 3.94 3.33 44.27 15 * 6.43 * 6.43 * 5.97 5.22 * 5.65 4.05 * 5.02 3.15 * 3.99 3.06 45.54 10 * 7.19 6.38 * 6.46 4.93 * 5.96 3.87 5.09 3.05 * 4.10 2.87 46.25 5 * 7.96 5.93 * 6.97 4.64 6.05 3.69 4.98 2.95 * 4.29 2.77 46.40 0 * 8.67 5.53 7.19 4.38 5.87 3.52 4.88 2.85 * 4.56 2.74 46.00 -5 8.68 5.22 6.97 4.16 5.73 3.38 4.81 2.79 4.80 2.78 45.06 -10 8.46 5.02 6.82 4.03 5.65 3.30 5.03 2.92 43.49 -15 8.37 4.93 6.76 3.97 5.65 3.30 5.42 3.17 41.29 -20 8.40 4.96 6.82 4.03 6.09 3.60 38.28 -25 * 8.25 5.13 * 6.63 4.35 34.31 -30 * 6.57 5.79 28.91 1.
Load point is the end of the arm. 2. Capacities marked with an asterisk (*) are limited by hydraulic capacities. 3. Lift capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. 4. The least stable position is over the side. 5. The total weight of machine is 23,800 kg (52,500 lb). Included are the; boom 8.5 m (27' 11"), arm 6.2 m (20' 4"), 5,300 kg (11,684 lb) counterweight, without bucket, all operating fluids and a 75 kg (165 lb) operator. 6. Lift capacities are in compliance with ISO 10567.