Photo Sensor 2-18 Pilot Cutoff Switch 2-81 Pilot Filter 4-45, 4-59 Pins and Bushings 4-45 Poor Visibility 1-65 Power Boost Selection 2-72 Power Button 2-12 Power Mode 3-32 Power Mode Selection 2-71 Power Mode Selector Button 2-21, 2-38 Power Plus Mode Selection 2-71 Preservation/Storing Machine 1-46 Pressurized Fluids 1-17 Pressurized Gas and Fluid 1-9 Proper Tools and Clothing 1-51 Proper Work Tools and Attachments 1-17 Protecting Cabin from Flying or Falling Objects (Optional) 1-27 Seat 2-83 Seat Adjustment Adjusting height of Seat and Depth of Cushion 2-83 Adjusting Height/Angle of Armrest 2-86 Adjusting Reclining 2-84 Adjusting the Seat Forward / Backward 2-83 Adjustment of Lumbar Support 2-84 Headrest 2-84 Left and Right Control Stand Height Adjustment 2-86 Left and Right Control Stand Location 2-85 Seat Belt 1-35, 2-84, 4-32 Securing the Work Tool 3-64 Shear Operation (Optional) 3-60 Shear Selection (Optional) 2-73 Shutdown Engine Stop 3-15 Parking Excavator 3-50 Side Door 2-94 Silica Dust Information 1-73 Sound 1-74 Specification 7-1 Standard Mode Selection 2-71 Standard Specification 7-1 Start Engine, Check Starting Ability, and Observe Exhaust Color at Start-up and at Normal Operating Temperature.
Listen for Any Abnormal Sounds.
4-34 Starting Engine 1-38 Start-up Cold Weather Hydraulic System Warm-up 3-13 Cold Weather Starting 3-7 Engine Start 3-5 Hydraulic System Warm-up 3-12 Inspection Before Starting Engine 3-2 Operational Checks Before Starting Engine 3-4 Starting Engine Using a Booster Battery 3-11 Stereo 2-80 Audio Control Panel 2-11 Storage Compartment 2-85 Straight Travel Pedal (Optional) 3-21 Structural Damage 4-72 Suction Strainer 4-70 Sun Visor 2-92 Sunglass Case 2-91 Supports and Blocking for Work Equipment 1-60 Swing Bearing 4-37 Gear and Pinion 4-46 Motor 4-103 Reduction Device 4-29, 4-56, 4-57, 4-61 System 6-10 Swinging or Traveling 1-39 Switch Operation Indication 2-71 Q Quick Coupler Operation (Optional) 3-64 Quick Coupler Operation Selection (Optional) 2-73 R Radiator Coolant 4-68 Ram Rock Operation Selection (Wheel Machine Only) 2-73 Read Warning Message 2-41 Rear View Camera Proper Operation (If Equipped) 4-32 Recommend Fuel, Coolant, and Lubricant 4-14 Refill Cooling System 4-30 Regeneration of Diesel Particulate Filter (DPF) 3-24 Removal 5-2 Removal and Installation of the DPF Assembly 3-31 Replacement 3-53 Reversal (If Applicable) 3-54 Rollover Protective Structure (ROPS) 1-25 ROPS Certification 1-26 ROPS Warning (Optional) 1-12 Rotating Fan 1-8 Rotating Operation (Optional) 3-63 Rubber and Plastics 1-55 Rubber That Contains Fluorides 1-54 S Safe Operation is Operator's Responsibility 1-16 Safety 1-1 Safety Decals 1-2 Safety Decals With Text 1-2 Safety Decals Without Text (No-Text) 1-3 Safety Lever 3-16 Safety Precautions 4-4 Scan Button 2-12 Index 8-5 DX225LC-3