Doosan DX225LC-3 — Battery Hazard Prevention

Since there is a potential hazard that sparks could be generated, always do the following: Do not let tools, rings or other metal objects make any contact between battery terminals. Do not leave tools or other metal objects lying near battery. When disconnecting battery terminals, wait for approximately one minute after turning engine starter switch key to "O" (OFF) position, and be sure to disconnect grounding terminal; negative (-) terminal first. Conversely, when connecting them, begin with positive (+) terminal and then grounding (-) terminal, Make sure that all terminals are connected securely. Flammable hydrogen gas is generated when battery is charged.

Remove battery from machine, take it to a well ventilated place, and remove battery caps, before charging it. After charging, tighten battery caps securely. After charging, secure battery back in machine. When repairing or welding electrical system, wait for approximately one minute after turning engine starter switch key "OFF". Then disconnect negative (-) terminal of battery to stop flow of electricity. Safety 1-63 DX225LC-3