XT855 Operator’s Manual Controls - 23 Front Console p CMW Item Description Notes 2. Engine cold start button c00ic108h.eps To help start cold engine, turn ignition switch to first position. Press cold start button as directed in notes. Release button, then turn ignition switch all the way clockwise. NOTICE: Do not press and hold button more than 20 seconds. IMPORTANT: Press cold start button according to temperatures below. • If ambient temperature is below 40° F (4° C), press and hold button for 5 seconds. • If ambient temperature is below 23° F (-5° C), press and hold button for 10 seconds. 3.
Work mode switch c00ic229h.eps To select tool carrier mode and control lift arms and ground drive, press top. To select excavator mode and control excavator bucket, press bottom. 4. Hydraulic fluid temperature indicator Lights when hydraulic fluid is over 210°F (100°C). • Allow engine to cool. • Check hydraulic fluid level. 5. Engine coolant temperature indicator c00ic120h.eps Lights when engine coolant temperature is over 230°F (110°C). • Allow engine to cool. • Check coolant level.