Toyota — Torque Converter

TORQUE CONVERTER - OIL PUMP (1 SPEED) REMOVAL. INSTALLATION T = N.m (kgf - cm) [ft - lbfl 1 Torque converter oil 4 3 Torque converter housing ASSY 2 Engine Wltorque converter Removal Procedure 1 Drain torque converter oil. 2 Remove the engine Wttorque converter 3 Disconnect the engine and torque converter housing ASSY 4 Remove the torque converter ASSY. [Point 11 5 Remove the oil pump Wtstator shaft. [Point 21 6 Remove the stator shaft. 7 Remove the oil pump gear. [Point 31 8 Remove the oil seal. [Point 41 Installation Procedure The installation procedure is the reverse of the removal procedure. Note: [7.24 - 13.75 ft - lbfl Stator shaft set bolt tightening torque:

T = 9.81 - 15.69 Oil pump set bolt tightening torque: T = 9.81 - 18.63 N - m (100 - 190 kgf - cm) [7.24 - 11.58 ft - lbf] See the note for the engine installation procedure. N - m (100 - 160 kgf - cm)