Point Operations [Point 1 I Removal: Sling wires on the transmission (or torque con - verter) case, hoist it slightly and support the bottom of the case with wooden blocks or a pantograph jack. [Point 21 Removal: Sling wires at hub bolts on the left and right sides, lock wires with hub nuts and slightly hoist the front axle. Support the bottom of the differential carrier with a garage jack. [Point 31 Removal: Two out of four on each side are reamer bolts. Remove them by using the SST. SST 093 1 0 - 22000 - 7 1 [Point 41 Removal.installation: Use the hoist and garage jack for this operation. [Point 51 Removal: Turn the differential to make the carrier face up - ward.
Sling wires on the carrier bracket and hoist it slightly. Remove the set bolts and use the service bolt for separation. Service bolt size: M 10 x 1 -25