Toyota — Differential

DIFFERENTIAL HOUSING REMOVAL.INSTALLATI0N Removal Procedure 1. Remove the differential ASSY. (See page 6-8.) 2. Remove the front axle. (See removal procedure steps 7 and 8 in the front axle hub removal, in - stallation section on page 7 - 9.) 3. Remove the brake ASSY. 4. Remove the axle bracket. [Point 11 5. Remove the differential housing. [Point 21 Installation Procedure The installation procedure is the reverse of the removal procedure. Note: procedure, Coat liquid packing (08826 - 00100) on the joint surfaces of the brake backing plate and axle bracket.

Brake ASSY set nut (backing plate self lock nut) tightening torque T = 117.68 - 137.29 See the note (page 6-9) for the differential ASSY removal N.m (1200 - 1400 [86.82 - 101.29 ft-lbl After installation, adjust the brake performance. For adjustment, make the vehicle travel in the for - ward and reverse directions about 10 times each. Drepress the brake pedal each time for stopping the vehicle. (This operation is especially required when the brake auto adjuster is moved to the shortening side.) kg-cm)