Toyota — Body

FUEL SENDER GAGE INSPECTION Sender + Sender - 1. Measure the resistance. (1) Check to see that the float moves smoothly. (2) Measure the resistance between the sender positive terminal and sender negative (body groun - ding) terminal while the float position is moved from point F to point E. Also check continuous variation of the resistance value. Note: Measure with the float being lowered in the direction from point F to point E. The resistance at each of point F and point E shall be measured with the arm in contact with the stopper.

Standard Float position mm (in) Resistance fl F 150.6 + 8 (5.929 + 0.31) 3 , 2 1 I2 310 .7 (12 .232) (Reference valve) 32.5 (Reference valve) E 428.9 + 8 (16.886 + 0.31) 110 + 7