RETURN FILTERmSUCTION FILTER REMOVAL - INSTALLATION 1 I 1 Breather set bolt Removal Procedure 1 Remove the hydraulic oil breather set bolt. 2 Disconnect the hoses (control valve to tank hose and lift cylinder to tank hose) from the tank side. 3 Remove the tank cover Wheturn filter. 4 Disconnect the return filter. 5 Remove the hose (tank to oil pump hose) from the tank. 6 Remove the set nut on the side of the tank and remove the pipe Wlsuction filter. 7 Disconnect the suction filter. Installation Procedure The installation procedure is the reverse of the removal procedure.