Point Operations [Point 1 I Disassembly: SST 09950 - 2001 7 [Point 21 Reassembly: Do not mistake the side roller mounting di - rection. The side where the chamfering radius of the roller outer circumference shall face the front side. [Point 31 Disassembly: The eccentric roller pin set nuts use lefthand screw on the right side and right - hand screw on the left side. Reassembly: (1 994.1 -- 1994.7) Install the eccentric roller pin punched with the " R " mark on the right side and the one without a punch mark on the left side. (1 994.7 - (1994.7 - ) Install the eccentric roller pin punched with the " L " mark on the left side and the one without a punch mark on the right side. ) Reassembly:
Keep the eccentric roller pin set nuts not tightened here and adjust the eccentric rollers after installing the lift bracket on the vehicle. L pumch mark