MAST ADJUSTMENT (SV MAST) Mast Lift Roller Adjustment (SV) lnner Outer mast mast ring into contact Bring into contac This roller 1. lnner mast roller clearance adjustment ( 1 7.72 in). (2) Shift the inner mast to one side to bring the roller into contact with the outer mast, and adjust the clearance between the roller and mast at the closest position on the opposite side to the following value by inserting the inner mast roller shim. ( 1 ) Measure the clearance with the mast overlap at near 450 mm (0 - 0.031 in) Shim thickness: 0 . 5 and 1.0 mm 0 - 0.8 mm Standard clearance A = ( 0.020 and 0.039 in) (3) Distribute the shim thickness equally to the left and right rollers.
(4) After the adjustment, check that the inner mast move smoothly in the outer mast.