Toyota — Mast

Lift Bracket Roller Adjustment (SV) Lower side roller in) Inner mast 1. Lift roller and side roller clearance adjustment (1) Measure the clearance when the center of the lift bracket upper side roller is 100 m m (3.94 in) from the top of the inner mast. (2) The upper and lower lift rollers need no adjustment because they are fixed by snap rings. (3) Adjust the clearances at the middle lift rollers as follows: Shift the lift bracket to one side t o bring the roller into contact with the inner mast, and adjust the clearance between the roller side face and the mast at the closest position on the opposite side t o the following value by inserting the lift roller shim.

(0 - 0.031 in) Shim thickness: 0.5 and 1.0 m m (0.020 and 0.039 in) 0 - 0.8 m m Standard clearance C = (4) Distribute the shim thickness equally to the left and right sides. (5) Adjust the upper and lower side rollers after adjusting the middle lift rollers. Bring the side roller on one side into contact with the mast side surface and adjust the clearance between the side roller and inner mast surface to the following value by inserting the side roller shim. (0 - 0.024 in) Shim thickness: 0.5 and 1.0 m m (0.020 and 0.039 in) Standard clearance D ' = 0 - 0.6 m m (6) Distribute the shim thickness equally to the left and right side rollers. 2.

After the adjustment, the lift bracket should move smoothly along the overall mast length.