1 Remove the radiator cover. 2 Remove the engine hood. 3 Remove the toe board. 4 Remove the battery and battery case. 5 Disconnect the electrical parts wiring, and remove the bracket Wlelectrical parts. (Keep the fuse box free by removing the set bolts.) 6 Remove the radiator reservoir tank. 7 Remove the air cleaner: [Point 11 8 Remove the undercover and tire cover RH. (Only 22 engine models) 9 Drain the coolant. 10 Remove the radiator. 1 1 Disconnect the exhaust pipe. 12 Disconnect the fuel hose. [Point 21 13 Disconnect the accelerator wire.
(Disconnect on the carburetor side on gasoline engine models, or on the injection pump side on diesel engine models.) 14 Remove the frame side covers RH (rear and front). 15 Remove the oil pump Wlpump hose. 16 Remove the horn. 17 Disconnect the clutch release cylinder from the clutch housing and keep it free. 18 Disconnect the gear shift lever link rod. [Point 31 19 Disconnect electrical wiring. 20 Remove the propeller shaft cover and propeller shaft. 21 Remove the transmission mounting set bolts. 22 Remove the engine mounting set nuts. 23 Remove the engine Wltransmission. [Point 41 Installation Procedure The installation procedure is the reverse of the removal procedure. Note:
Bleed air from the fuel system after engine installation. (In diesel engine models only)