Toyota — Cylinder

REMOVAL - INSTALLATION I 1 Inner mast I Removal Procedure 1 Hoist the inner mast. [Point 11 2 Remove the front hose cover. 3 Remove the safety down valve. Installation Procedure The installation procedure is the reverse of the removal procedure. Note: Safety down valve tightening torque T = 29.42 - 39.23 [21.71 - 28.94 N.m (300 - 400 kg - cm) ft-lb] 1 /' I Point Operation I [Point 1 I Removal~installation: Sling the inner mast (middle mast) with a wire rope, and hoist it. Set the SST on the inner mast (middle mast) tie beam and lower the inner mast until it comes into contact with the SST. SST 096 10 - 22000 - 7 1