Toyota — Cylinder

REMOVAL - INSTALLATION Note: (V-SV) removal section for the removal of the front lift cylinder ASSY. Perform the following operations after installation: Repeat lifting and lowering to stroke ends without load for air bleeding and check normal operation. After the operation check, check the hydraulic oil level and add if insufficient. Adjust the lift chain tension equally on the left and right sides. See the lift cylinder ASSY Disassembly Procedure 1 Remove the chain wheel supporter. 2 Remove the cylinder rod guide. 3 Remove the piston rod. [Point 11 4 Remove the wear ring. 5 Remove the lift cylinder. [Point 21 6 Remove the safety down valve.