Toyota — Cylinder

REMOVAL - INSTALLATION 1 Mast Removal Procedure 1 Hoist the mast. 2 Disconnect the hose. 3 Remove the tilt cylinder front pin. [Point 11 4 Remove the tilt cylinder rear pin. 5 Remove the tilt cylinder ASSY. Installation Procedure The installation procedure is the reverse of the removal procedure. Note: Apply MP grease on the tilt cylinder front pin and rear pin inserting portions. Tilt the mast slowly forward and backward a few times to confirm normal operation. Check the hydraulic oil level and add if insufficient. Tile the mast fully forward and backward to check no uneven movements between the left and right sides. To adjust uneven movements, change the screw - in amount of the rod joint.