ENGINE REMOVAL.INSTALLATION (TRANSMISSION MODELS) Note: The procedures described here are for the jobs after disconnection in the engine Wltransmission state. T = N-m (kg-cm) [ft-lbl I I Removal Procedure 1 Remove the clutch housing cover. 2 Remove the clutch disc and clutch cover. (See Clutch Cover Removal section on page 2 - 5.) 3 Remove the flywheel. 4 Slightly hoist the clutch housing W/transmission. 5 Remove the clutch housing and engine coupling bolts to disconnect the clutch housing W/trans- mission, and remove the engine. Installation Procedure The installation procedure is the reverse of the removal procedure.