Toyota — Appendix

REAR AXLE Axle shaft set bolt 1 - 2 t on series Standard - - - 68.65 88.26 (700 900) [50.65 86.821 3 ton series Standard - - - 98.07 127.49 (10 00 1300) [72.35 94.061 Divided rim set nut ('2 series 1 ton series Standard - - - 49.03 68.65 (500 700) L36.18 50.651 2 ton series Standard - - - 1 17.68 176.52 (12 00 1800) F86.82 130.231 Front wheel hub nut (single tire) 1 ton series Divided rim Standard - - - 107.87 196.13 (11 00 2000) [79.59 144.701 Side ring rim Standard - - [I - 176.52 392.27 (18 00 4000) 30.23 289.401 2 ton Series Divided rim Standard t Side ring rim Standard t 3 ton series Standard - - - 294.20 588.40 (3000 6000) L217.05 434.1 01 Front wheel hub nut (double tire) 1 ton Series Inside Standard - - [I - 176.52 392.27 (1800 4000) 30.23 289.401 Outside Standard t 2 ton Series Inside Standard t Outside Standard t 3 ton Series Inside Standard - - - 294.20 588.40 (3000 6000) L217.05 434.101 Outside Standard t Rear axle ASSY Rear axle ASSY front to rear clearance mm (in) Standard 0.5 (0.020) or less Rear axle center pin 'bushing inside diameter mm (in) Limit 52.0 (2.047) Bellcrank and tie rod Bellcrank pin outside diameter mm (in) Standard 28.0 (1.

I021 Limit 27.8 (1.094) Bellcrank upper face to rear axle beam clearance mm (in) Standard 0.5 (0.020) or less Rear axle hub and steering knuckle Rear axle hub starting force (at hub bolt) (kg) [Ib1 1 ton series Standard - - - 14.7 39.2 (1.5 4.0) L3.3 8.81 2.3 ton series Standard - - - 14.7 44.1 (1.5 4.5) L3.3 9.91 King pin outside diameter 'mm (in) Standard 28.0 (1. lo21 Limit 27.8 (1.094) Steering knuckle starting force (at front end of knuckle) N (kg) [Ibl Standard - - - 14.7 39.2 (1.5 4.0) L3.3 8.81