Toyota — Engine

ACCELERATOR PEDAL ADJUSTMENT 1. Adjust the accelerator pedal height. (1) Adjust accelerator link stopper bolt @ t o make pedal height A satisfy the following dimension: * 0.08 in) (from accelerator bracket t o top of roller) B = 14 m m (0.55 in) (reference value) Accelerator pedal roller height A = 84 * 2 mm (3.31 2. Adjust the height of accelerator pedal stopper bolt @. C = 39.7 m m (1.563 in) (reference value) 5K - 4Y engine models (1) Depress the accelerator pedal gradually, and adjust the height of stopper bolt @ so that the carburetor throttle lever stops immediately before the full open - ing position.

1 DZ-2Z engine models (1 1 Adjust the height of stopper bolt @ so that the clearance between the injection pump lever and maximum speed adjusting screw satisfies the fol - lowing range when the accelerator pedal is in con - tact with stopper bolt @. D = 0 - 0.5 mm (0 - 0.020 in) (0 in) clearance here means that the accelera - tor pedal comes into contact with the stopper bolt at the same time with establishment of the contact be- tween the lever and adjusting screw. 0 m m