Mitsubishi — 3.2.2 Installing relief valve

LUBRICATION SYSTEM 3.2 Installing oil filter, relief valve and oil pressure 7.85 to 11.8 N 㨯 m {0.8 to 1.2 kgf 㨯 m} [5.8 to 8.7 lbf 㨯 ft] 39.2 to 49.0 N 㨯 m {4.0 to 5.0 kgf 㨯 m} [29 to 36 lbf 㨯 ft] Installing oil filter, relief valve and oil pressure 3.2.1 Installing oil pressure switch &$87,21 Do not allow sealant to squeeze out at the thread end. Do not overtighten. Oil pressure switch socket wrench P/N:MD998054 7.85 to11.8 N·m {0.8 to 1.2 kgf·m} [5.8 to 8.7 lbf·ft] (1) Using an oil pressure switch socket wrench, tighten the oil pressure switch to the specified torque. (2) Apply a sealant to the threaded portion when installing the switch. Apply HERME SEAL H1 or THREEBOND 1344N.

Installing oil pressure switch 3.2.2 Installing relief valve Insert the relief plunger and relief spring into the gear case and tighten the plug to the specified torque. Relief plunger 39.2 to 49.0 N 㨯 m {4.0 to 5.0 kgf 㨯 m} [28.9 to 36.2 lbf 㨯 ft] Plug Relief spring Gear case Installing relief valve 9-8