INLET AND EXHAUST SYSTEMS 2. Disassembling, inspecting and reassembling inlet and exhaust systems 2.1 Inspecting inlet cover and exhaust manifold Crack, damage, contamination, dirt adhesion and corrosion Crack, damage and corrosion Crack, damage and corrosion Crack, damage, contamination, dirt adhesion and corrosion Inspecting inlet cover and exhaust manifold 2.2 Measuring distortion of inlet and exhaust manifold Using a straight edge and thickness gauges, measure distortion across the cylinder head mounting surfaces of the inlet cover and exhaust manifold. If the measured distortion exceeds the limit, correct by grinding or replace the part.
Straight edge Distortion on mounting surfaces of intake cover and exhaust manifold 0.15 mm [0.0059 in.] Thickness gauge Measuring distortion on inlet cover 11-3 Item Limit