Mitsubishi — 2.1.3 No load test

ELECTRICAL SYSTEM 2.1.3 No load test &$87,21 Use as thick a wire as possible and firmly tighten each terminal. When detecting the rotation at the tip of the pinion, be careful, as the pinion pops out during operation. A Ammeter Switch B S M Battery 12V V Voltmeter (1) Connect the starter to the circuit as shown in the illustration. (2) In normal condition, the pinion pops out when the switch is turned ON, and the starter rotates at or more the specified rotation speed. If the terminal voltage, current or rotation speed does not meet the standard, disassemble, inspect and repair the starter.

Starter Test at no load 12-10 Item Standard Starter model name M000T60481 M001T68381 Nominal output V-kW 12-1.2 12-1.7 No-load characteristics Terminal voltage V 11 11 Current A 90 or less 110 or less Rotation speed min-1 2500 or more 2400 or more