ELECTRICAL SYSTEM 2.10.1 Separating front bracket from stator &$87,21 Do not disassemble the alternator unless the repair is necessary. Do not insert the screwdrivers too deep, as it can dam- age the stator. Rear bracket (1) Remove the through bolts. (2) With two flat-head screwdrivers inserted between the front bracket and stator, pry them apart. Stator core Front bracket Separating front bracket from stator 2.10.2 Removing pulley &$87,21 When setting the rotor in a vise, be sure to hold the base of the rotor claw. Do not hold the rotor claw, as it causes damage to the claw. Pulley Front bracket (1) Apply a cloth to the rotor and set it in a vise.
(2) Remove the pulley nut and then pull out the pulley. Rotor Removing pulley 2.10.3 Removing rear bearing Remove the rear bearing from the rotor using a bearing puller. Rear bearing Rotor Removing rear bearing 2.10.4 Removing front bearing Remove the screw, and then remove the bearing retainer and front bearing from the front bracket. Screw Front bearing Front bracket Bearing retainer Removing front bearing 12-40