Mitsubishi — 2.12.6 Assembling stator and front bracket

ELECTRICAL SYSTEM 2.12.4 Installing rear bearing Press-fit the rear bearing to the rotor. Rear bearing Rotor Installing rear bearing 2.12.5 Installing pulley (1) Insert the rotor into the front bracket. Apply a cloth to the rotor and set it in a vise. (2) Install the spacer and pulley, and secure the pulley with a nut. Pulley Front bracket Rotor Installing pulley 2.12.6 Assembling stator and front bracket (1) When installing the rotor into the rear bracket, lift the brushes with a piece of wire inserted through the small hole in the bracket. After installation, remove the wire. Rear bracket Brush Wire (2) Assemble the front bracket, stator and rear bracket and secure them with through bolts.

Securing brushes Front bracket Through bolt Stator core Joining stator and front bracket 12-47