Mitsubishi — 3.4.2 Verification after reassembly (ETS type)

ELECTRICAL SYSTEM 3.4.2 Verification after reassembly (ETS type) (1) After starting the engine, turn the starter switch key to the OFF position, and make sure that the solenoid activates and the engine stops. (2) During engine start, turn the starter switch key to the ON position, and make sure that the solenoid activates and the engine enters a stopped state. (3) Turn the starter switch key from the OFF position to ON, and then to START position. Make sure that the solenoid activates with the key turned to ON and that the solenoid instantly stops to activate with the key turned to START. 12-52