. OPERATION OPERATION MOVING MACHINE IN REVERSE WARNING When switching between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine, so use extreme caution when reversing the machine. Always stop the machine completely before shifting between FORWARD and REVERSE. Operate shift lever (1) to the R1 or R2 position, then gradually 3 - 91 depress accelerator pa nel (2) to move the machin NOTICE The machine cannot tra vel in reverse if the dump body is raised . Lower the dump body, set the dump lever to the FLOAT posit ion, then operate the shift lever to the "R 1" or "R2" position.
FORWARD and REVERSE, stop the machine When shifting between machine completely and run the engine at low idling when shif ting the l ever . After moving the shift l ever, do not accelerate until yo u detect that the transmission clutch ha s engaged. t lever with the accelerator pedal depressed. Do not operate the shif t lever with the accelerator ped al depressed This will cause a big s hock and will also reduce the service lif e of the machine.