. OPERATION OPERATION SHIFTING GEAR WARNING will be poor. 3 - 94 Do not move th e gear shift lever to the N position when the ma chine is traveling or when it is traveling d own a slope. Always place the transmissio n in gear before travelin If the transm ission is in Neutral, the engine cannot provid e any braking effect and the steering whe el will become heavier. In re will be lack of cooling oil for the retarder, so there is danger that it will overheat or that the actuation of the brake There may al so be damage to the tra nsmission or other pa rts of the power train, and there is danger of unexpected accidents. When shifting gear, do as follows.
ransmission, so set gear shift n, and the transmission will match the travel speed. This machine lever (1) to automatically has an automatic t the desired positio shift to a position to When the dum the transmiss transmission traveling. p body is raised, if the shift lever is at the D position, ion is fixed in 2nd, and if it is at positions 1 - 5, the is fixed in 1st. Keep the dump body lowered when NOTICE When shiftin g between FORWARD and REVERSE, stop the machine completely, moving the detect that t and run the engine at low idle when shifting the lever. After gear shift lever, do not depress the accelera tor until you he transmission clutch has engaged.
Do not opera te the gear shift lever wi th the accelerator peda l depressed. This will cau machine. se a big shock, and will also reduce the servi ce life of the SHIFTING UP celerator pedal (2) is depressed to accelerate the 1. When ac machine, to direct d 2. If the ma automatic 1. When ac the lockup clutch is en gaged to shift the tr ansmission rive. chine is accelerated further, the transmission will ally shift up. 2. If the ma ally shift up.