. OPERATION OPERATION 3 - 109 WHEN USING TILT CYLINDE (If equipped) 1. Remove pin (1) in t he moun t at the rear of the cab, and insert it in h ole ( 3). 2. Remove t he ca b mounting b olts (8 pieces 3. Apply hydraulic pressure 20. 6 to 34.3 MP a (210 to 3 50 kg/cm 2, 298 0 to 4970 PSI) to hose ( 4) behind the front right wheel and raise the cab. 4. After tiltin g up, f ixed the cab in position wit h lock ba r (5) Make and l sur ock i e that lock t securely bar (5) i with lock After hole