. OPERATION LONG-TERM STORAGE LONG-TERM STORAGE DURING STORAGE WARNING AFTER STORAGE 3 - 124 BEFORE STORAGE age (more than one month), store as follows. d dried, house the machine in a dry building. Never leave it outdoors. When keeping in long-term stor age (more than one month), store as follows After every part is washed an d dried, house the machine in a dry building . Never lea In case it is indispensable to l eave it outdoors, park the machine on the fl at ground a nd cover it with c anvas etc. Completely fill the fuel tank. This prevents moisture from collecting. before storage. he hydraulic cylinder piston rod with grease.
Lubricate and change the oil Coat the exposed portion of t he hydraulic cylinder piston rod with grease Disconnect the negative term inals of the battery and cover it or remove it fr om the mac hine and store it s eparately. Apply the parking brake. Set the tire inflation pressure for each tire to within the range of the specifi ed inflation pressure fo r the t ype of tire. Push the retarder control lev er forward to the OFF position. he N position and turn the starting switch OFF.
Place the gear shift lever at t he N position and turn the starting switch O To prevent corrosion, be sure to fill the cooling system with Supercoolant ( AF-NAC) or permanen t type antifreeze (density between 30% and 6 8%). If it is necessary to perform the rust -prevention operation while the machine is indoor s, open the d oors and windows to improve ventilation and prevent gas poisoni During the storage period, oper ate the machine once a month to prevent lo ss of the oil film at t he l ubrica ted parts.
At the same time, charge the ba Before operating the work equip ment, wipe off all the grease from hydraulic piston rods NOTICE If the machine has been stored wit hout carrying out the monthly rust-prevention op eration, con sult your Komatsu distributor before using it. When using the machine after l ong-term storage, do as follows before usin Wipe off the grease from the Add oil and grease at all lubri When the machine is stored fo r a long period, moisture in the air will mix wit h the oil. C heck the oil befor e and after starting the engine. If there i s water in the oil, change all the oil. PRECAUTIONS BEFORE TRAVELING AFTER LONG-TERM STORAGE 1. Check all the oil and water l 2.
When traveling after long-te or 1 km to run the machine rm storage, travel forward at a speed of 10 to 15 km/h (6. 2 to 9.3 MPH) for 5 minutes in, then change to normal travel.