Komatsu — CLEAN TRANSMISSION CASE STRAINER

. MAINTENANCE SERVICE PROCEDURE CLEAN HYDRAULIC TANK STRAINER WARNING CLEAN TRANSMISSION CASE STRAINER WARNING Drain the oil from the transmission case before starting the "CHANGE OIL IN 4 - 80 The parts and oil are at high temperature after th e engin e is stopped , and may cause serious burns. Wait for the temperature to go down be fore starting the operation . If there is still p ressure remaining inside t he case , the oil or plug may fly out. Turn the plug slowly to release the pressure , then remove it caref ully. 1. Remove plu g (1) of the strainer (2 places wheel. 2. Take the st clean diese 3. Assemble t he strainer to strainer case (2), then in stall p lug ( 1).

the f ront left The parts and oil are at high temperature after th e engin e is stopped , and may cause serious burns. Wait for the temperature to go down be fore starting the operation . If there is still p ressure remaining inside t he case , the oil or plug may fly out. Turn the plug slowly to release the pressure , then remove it caref ully. operation. Fo r details, see Sectio TRANSMISSIO N CASE (PAGE 4-67)" 1. Remove bo strainer. lt (1), then remove cover (2) and take out the the 2. Remove an y dirt stuck to the strainer, then wash i n clea n diesel fuel or flush 3. Install the s ing oil. If the strainer is trainers in their original damaged, replace it. position.