3.4 VEHICLE HEALTH MONITORING SYSTEM VHMS – HEALTH MONITOR OPERATION Maintenance Monitor 1.2.4 (continued) Illust. Z 21579D: 3050 Operating hours The 250 h, 500 h, 1000 h and 3000 h maintenance has not been carried out within the yellow time period so the background color has changed to red, indicating that the limit for these maintenance items is exceeded by 50 h Inform Service about the present maintenance display. Maintenance is urgently required. The 2000 h maintenance has been carried out at 2000 operating hours and was confirmed in the Service Menu. There are 950 h left until the next 2000 h maintenance becomes necessary. Illust. Z 21579E:
3100 Operating hours The 250 h, 500 h, 1000 h and 3000 h maintenance has been car- ried out at 3100 operating hours and was confirmed in the Service Menu. The background color has changed to gray. Illust. Z 21579F: 3550 Operating hours The 250 h, maintenance has been carried out at 3250 and at 3500 operating hours. The periodic 500 h maintenance which was also due at 3500 operating hours was not carried or not con- firmed in the Service Menu so the background color changed to red. Inform Service for carrying out the 500 h maintenance. On pressing the key it is possible to return to the monitor 1. Peculiarities to be observed: Higher maintenance also include lower maintenance.
(Lower maintenance must also be carried out!) Exception: On perfor- mance of the 3000 h maintenance it is not necessary to also carry out the 2000 h maintenance. The maintenance cycles are rigidly linked to the running time meter. Maintenance may be confirmed max. 48 h prior to elapsing the maintenance cycle. Only running time hours are taken into consideration (No minutes or seconds). On initial start-up any maintenance is indicated with gray. NOTICE The routine visual checks and inspections after every 10 and 50 operating hours are not called up on the Maintenance Monitor. Carry out these checks and inspections according to the MAINTENANCE section 4 in this manual.
The engine maintenance has to be carried out according to the separate Engine Operation and Maintenance Manual filed in this binder. REMARK On new machines an INITIAL SERVICING after the first 250 and 1000 operating hours is required, in addition to the periodic maintenance intervals displayed on the monitor. Carry out all maintenance items according to the MAINTENANCE section 4 in this Manual. 104 WARNING WARNING