OPERATION 3.6 POWER HOUSE 3.6.1 EMERGENCY ENGINE SHUTDOWN SWITCHES Legend for illustration Z25359 (1) Battery main switch keys NOTICE After switching OFF the main key switch in the Operator’s cab, wait at least 3 minutes before switching OFF the battery main switches. The Vehicle Health Monitoring System (VHMS) needs this period for saving data. If batteries are switched OFF before this time period is over, data will be lost.
(2) Battery main switches (S2 and S3) (3) Emergency engine shutdown switch (S33a) on radiator door (4) Emergency engine shutdown switch (S33b) on rear power house door (5) Emergency engine shutdown switch (S33c) in pump compartment on the central control and filter carrier (6) Maintenance safety switch (S58) for start prevention of the Diesel engine, see next page for more information (7) Light switch (S15) on front door for interior power house lighting (8) Light switch (S15a) on rear door for interior power house lighting (A) Push button of emergency shutdown switches (3, 4 and 5) for stopping the engine (B) Release button for emergency shut down switch (if so equipped) In case of emergency push in the button (A) to stop the engine.
Never stop the engine from a full load except in case of emergency. If a hot engine is shut down without previous idling period of three to five minutes, the temperature in certain engine parts rising sharply after the cooling sys- tem ceases to function. The resulting thermal stress, especially in the turbochargers, may cause serious dam- age. For restarting, first push in release button (B). On switches without release button (B) pull out button (A) and then start the engine in the normal way at the control panel in the operator’s cab. The engine can not be started with button (A) in depressed position.
NOTICE When one of the Shutdown switches (3 - 5) is activated, the VHMS display informs the Operator by a correspond- ing message. 127 WARNING WARNING