OPERATION 3.9 STARTING THE ENGINE Before starting read the Engine Operation Manual. Observe the instructions for starting the Engine. NOTICE After repairs on the Diesel engine or starter motors, make sure that the ground cables are correctly connected before starting the engine. Loose or missing ground cables can cause fire, serious injury or death. Start the engine from the operator’s seat only. Never attempt to start the engine by shorting across starter ter- minals. This can cause fire, serious injury or death. Before each starting make sure that all controls are in neutral position. Be sure to sound the signal horn before starting to make your intention clear.
Before starting the engine and again before starting work, pay attention to the hydraulic oil temperature. Refer to para- graph "Hydraulic Oil Warm-up" in this section. Legend for illustration Z25449 (1) Key operated main switch (2) Acoustic warning signal (3) Health monitor (4) Engine speed selector switch Low idle - High idle (5) Signal horn button (6) Rotary switch - engine start (7) Rotary switch - engine stop (8) Strike button - emergency engine shutdown and cut out of pilot control system (9) Safety lock lever 161 WARNING WARNING CAUTION CAUTION