OPERATION 3.18 TRANSFER PUMP FOR HYDRAULIC OIL 3.18.2 FUNCTIONS OF THE TRANSFER PUMP A - Transfusing oil from the suction oil reservoir (11), illustra- tion Z25471 into the main oil reservoir. Necessary for evacua- tion of the suction oil reservoir, when changing the hydraulic oil (main oil reservoir will be evacuated via service arm con- nector, see page 212 for details). Before servicing the main hydraulic pumps it is advisable to empty the suction oil reser- voir partially. B - Transfusing oil from return oil collector pipe (12) and back- pressure valve pipe (13) into main oil reservoir.
Necessary when changing the hydraulic oil and prior to servicing the high pressure filters or the main control valves (oil return system). Before operating the transfer pump, lower the attachment to the ground with the stick fully retracted and the bucket fully rolled back. Shut down the engines. NOTICE During normal operation the valves (1, 2 and 3) must be in closed position -C-. A - Pumping the oil from the Suction Oil Reservoir (11) into the Main Oil Reservoir 1. Close main valve (10). 2. Open cock (1), position -O-. REMARK In order to prevent build-up of a vacuum in the suction sys- tem, open the vent plugs on the suction port of each main hydrau- lic pump. 3.
Switch on pump (4) with switch (6). A level switch turns off transfer pump (4) when the oil level in the main reservoir has reached maximum height. The pump will be switched on again when the oil level sinks below the maximum level. When changing the hydraulic oil, be sure to evacuate the main oil reservoir via the service arm connector simultaneously with the transfusion procedure. Otherwise the level switch would switch off the transfer pump preventing overfilling of the main oil reservoir. 4. When the suction oil reservoir is empty or after completion of the maintenance job switch off transfer pump (4) with switch (6). Close cock (1), position -C- and open main valve (10). 5.
With the main shut-off valve (10) open, the suction oil reser- voir will be filled with oil from the main oil reservoir. Let the vent plugs on the main pump suction ports open to allow the air to escape from the suction oil reservoir and hoses. 209 CAUTION CAUTION